Magnetic structure of the europium fulleride ferromagnet Eu(6)C(60)

The powder neutron diffraction technique has been used for the direct observation of magnetic scattering below a Curie temperature of approximately 14 K in the fullerene-based molecular ferromagnet Eu6C60. Europium is in the divalent state with a magnetic moment of 7.1(3) muB per atom, and the configurational symmetry of the magnetic structure is body-centered cubic. Close contacts between Eu2+ and neighboring C60 units provide the signature of orbital hybridization, which can evidently account for the conducting and magnetic properties of the material.     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Synthesis of new 1,2,3-triazolo[1,2-a]benzotriazole derivatives or substituted 2,3-benzo-1,3a,6,6a-tetraazapentalenes. II

This paper continues the synthesis of new 1,2,3-triazolo[1,2-a]benzotriazoles or 2,3-benzo-1,3a,6,6a-tetrazapentalenes to submit to biological assays. The derivatives were obtained by deoxycyclization reactions of appropriate nitrophenyl-1,2,3-triazole derivatives and by thermal decomposition of appropriate azidophenyl-1,2,3-triazoles (Schemes 1 and 2). Some attempts to extend these synthetic routes to the preparation of 1,2,4-triazolo[1,2-a]benzotriazoles (Scheme 3) and 1,2,3-triazolo[1,2-b]-4H-1,2,3-benzo-triazines (Scheme 4) completely failed.     

New 1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidine derivatives II

The 7‐chloro‐3‐(2‐chlorobenzyl)‐ and 7‐chloro‐3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐d]pyrimidines ( 1 and 4 ), by nucleophilic replacement with some hydrazides, gave the corresponding 7‐hydrazidoderivatives ( 2a‐e and 5a‐e ). These, by heating in Dowtherm, underwent an intramolecular cyclization to form the new tricyclic 7‐substituted‐3‐(2‐chlorobenzyl)‐ and 3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidines ( 3a‐d and 6a‐d ). The 7‐hydrazino‐3‐(2‐chlorobenzyl)‐ and 7‐hydrazino‐3‐(2‐fluorobenzyl)‐triazolo‐pyrimidines ( 9a and 9b ) were also prepared via the corresponding mercapto ( 7a and 7b ) and thiomethyl ( 8a and 8b ) derivatives.     

The oxidative addition of diphenylphosphine and monophenylphosphine to the electron-rich rhenium-rhenium triple bond. The isolation and characterization of compounds that contain the four-center Re(μ-X)(μ-PR2)Re cluster (X=halide)

Diphenylphosphine oxidatively adds to the ReRe bonds of Re₂ X ₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) and Re₂Cl₄(-dpam)₂ (dpam=Ph₂AsCH₂AsPh₂) to afford the dirhenium(III) complexes Re₂(-X)(-PPh₂)HX ₃(-LL)₂. The dppm complexes have also been prepared from the reactions of Re₂(-O₂CCH₃)X ₄(-dppm)₂ with Ph₂PH, and a similar strategy has been used to prepare Re₂(-Cl)(-PPh₂)HCl₃(-dmpm)₂ (dmpm=Me₂PCH₂PMe₂) from Re₂(-O₂CCH₃)Cl₄(dmpm)₂. Phenylphosphine likewise reacts with Re₂ X ₄(-dppm)₂ to give Re₂(-X)(-PHPh)HX ₃(-dppm)₂. An X-ray crystal structure determination on Re₂(-Cl)(-PPh₂)HCl₃(-dppm)₂ confirms its edge-shared bioctahedral structure. This complex crystallizes in the space group (No. 148) witha=21.699(3) Å, =84.50(4)°,V=10084(5) ų, andZ=6. The structure was refined toR=0.049 (R _w 0.069) for 5770 data withI>3.0(I). The Re-Re distance is 2.5918(7) Å. Oxidation of the bromide complex Re₂(-Br)(-PPh₂)HBr₃(-dppm)₂ with NOPF₆ produces the unusual dirhenium(III, II) cation [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]⁺ which has been structurally characterized as its perrhenate salt, [Re₂(-H)(-Br)[P(O)Ph₂]Br₂(NO)(-dppm)₂]ReO₄ · 2CH₂Cl₂. This complex crystallizes in the space group (No. 2) witha=14.187(7) Å,b=16.419(5) Å,c=16.729(5) Å, =98.76(2)°, =110.11(3)°, =104.66(3)°,V=3414(6) ų,Z=2. The structure was refined toR=0.040 (R _w =0.051) for 5736 data withI>3.0(I). The presence of a phosphorus-bound [P(O)Ph₂]^– ligand, a linear nitrosyl and a bridging hydrido ligand has been confirmed. The Re-Re distance is 2.6273(8) Å.     

Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions

Biodegradable polyurethanes are an interesting alternative to many applications that involve plastics since they can minimize environmental problems caused by the low rates of natural degradation of synthetic polymers. In addition, since waterborne polyurethanes are based on aqueous dispersions, they restrict the use of organic solvents during processing and application of the polymer, thus contributing furthermore to reduce environmental damage. In this work, aqueous anionic polyurethane dispersions (PUD) with tailorable susceptibility for hydrolysis were synthesized by progressively replacing polypropylene glycol (PPG) with a biodegradable polycaprolactone diol (PCL) as soft segments. The hard segments were formed by extending isophorone diisocyanate (IPDI) with hydrazine (HZ). Dimethylol propionic acid (DMPA) was used as ionic center and triethyl amine (TEA) as neutralizer. The degree of phase separation was evaluated mainly by infrared spectroscopy (FTIR) and small angle X-ray scattering (SAXS). The results indicated that phase separation between hard and soft segments of poly(ester-urethane) is more significant than that of poly(ether-urethane). Data obtained from SAXS experiments indicated that phase separation within soft domains can also be present in samples containing both polyester and polyether soft segments. Hydrolytic degradation of the polymers in buffer solution of pH 7.4 and alkaline solution was performed as an initial test. The results showed that the fraction of polyester soft segments in the polyurethanes can be used to tailor the susceptibility of the materials to hydrolytic attack. Polyurethanes having higher contents of polyester were more promptly hydrolytically degraded than polyurethanes containing only polyether segments.     

An intraindividual study of the characteristics of erythema induced by bath and oral methoxsalen photochemotherapy and narrowband ultraviolet B

We compared the characteristics of psoralen and ultraviolet A (PUVA) erythema in skin photosensitized by bath or oral methoxsalen in 20 subjects. Erythema was assessed visually and with a reflectance instrument at 24 h intervals for 7 days. In addition, narrowband ultraviolet B (TL-01 UVB) erythema was examined in 19 of these subjects at 4, 8, 12, 24, 48 and 72 h and in another nine subjects at 12, 15, 18, 21 and 24 h. Both bath and oral PUVA exhibited broad erythemal peaks beyond 72 h. For topical PUVA the lowest minimal phototoxic dose (MPD) occurred at 120 and 144 h (P = 0.01 and 0.03 compared with 72 h). Oral PUVA erythema peaked earlier at 96 h: the MPD was significantly lower at 96, 120 and 144 h compared with 72 h (P = 0.001, 0.01 and 0.02, respectively). At 120 h, bath PUVA had a significantly steeper slope compared with oral PUVA. The TL-01 UVB minimal erythema dose was significantly lower at 12 h compared with 24 h (P = 0.019). The majority of subjects were at maximal erythema at 12 h (22 of 28) and 15 h (eight of nine). Our results suggest that peak erythema for bath PUVA, oral PUVA and TL-01 UVB occurs at 120, 96 and 12-15 h, respectively.     

Ab initio potential energy surface, variational transition state theory, and quasiclassical trajectory studies of the F+CH4-->HF+CH3 reaction

In this work we present a study of the F+CH(4)-->HF+CH(3) reaction (DeltaHdegrees(298 K)=-32.0 kcal mol(-1)) using different methods of the chemical reaction theory. The ground potential energy surface (PES) is characterized using several ab initio methods. Full-dimensional rate constants have been calculated employing the variational transition state theory and using directly ab initio data. A triatomic analytical representation of the ground PES was derived from ab initio points calculated at the second- and fourth-order M?ller-Plesset levels with the 6-311+G(2df,2pd) basis set, assuming the CH(3) fragment to be a 15 a.m.u. pseudoatom in the fitting process. This is suggested from experiments that indicate that the methyl group is uncoupled to the reaction coordinate. A dynamics study by means of the quasiclassical trajectory (QCT) method and employing this analytical surface was also carried out. The experimental data available on the HF internal states distributions are reproduced by the QCT results. Very recent experimental information about the reaction stereodynamics is also borne out by our QCT calculations. Comparisons with the benchmark F+H(2) and analogous Cl+CH(4) reactions are established throughout.     

A relativistic CI study on OIII: wavefunctions,excitation energies and transition probabilities

The relativistic CI method is used to determine N-electron wavefunctions for the 1s ² 2s ² 2p ² (³ P ₀,³ P ₂,¹ D ₂), 1s ² 2p ^{4 3} P ₂ even levels, and the 1s ²2s2p ³ (³ D ₁,³ P ₁,³ S ₁,¹ P ₁), 1s ²2s ²2p3s (³ P ₁ and¹ P ₁), 1s ²2s ²2p3d (³ D ₁,³ P ₁,¹ P ₁)J=1 OIII levels. Excitation energies and emission probabilities between these levels are reported in the electric dipole approximation, both for the Coulomb and the Babushkin gauges.ns, p,np,nd- andnd (n17) numerical basis functions have been used for the construction of CSF's entering the CI expansion for the ASF's of these levels. Radiative matrix elements of the type calculated here within the framework of the relativistic CI method, may be used in laser assisted spectroscopic studies of atoms and ions.     

Affinity capillary electrophoresis study of the linkage existing between proton and zinc ion binding to bacitracin A1

Measurements by capillary electrophoresis (CE) of bacitracin A(1) effective mobility at different pH values permitted to estimate the five acidic dissociation constants and the Stokes radii at different protonation stages of the macrocyclic dodecapeptide. The pK(a) values were 3.6 and 4.4 for the two carboxylic groups of the lateral chains of D-Asp-11 and D-Glu-4, respectively, 6.4 for the aza-atom of the imidazole ring of His-10, 7.6 for the amino group of N-terminal Ile-1 and 9.7 for the delta-amino group of D-Orn-7, very close to the values obtained by other researchers by titration experiments. In agreement with a rigid macrocyclic structure the Stokes radii of different protonated forms ranged only between 14.3 and 14.8 A. Best fitting procedures performed on experimental mobility measured at two different pH values (5.50 and 6.72) in the presence of increasing Zn(+2) concentration allowed confirming the model that assumes the binding of Zn(+2) to P(0) peptide form with a 1.5 x 10(3) M(-1) intrinsic association constant. Following to Zn(+2) binding, the pK(a) of the amino group of N-terminal Ile-1 is shifted from 7.6 to 5.9 and the Stokes radius is reduced of about 3 A. The mean charge of the bacitracin A(1)-Zn(+2) complex resulted +1.67 and +1.12 at pH 5.50 and 6.72, respectively. These results suggest that the amino group of N-terminal Ile-1 is not essential for Zn(+2) binding.